The following is a guide on how to set up the IMX274 MIPI CSI device using OpenCV on Connect Tech Jetson™ carriers.
sudo apt-get install libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev
Grab remaining GST plugins using the following:
sudo apt-get install gstreamer1.0-plugins*
sudo apt-get install libgtk2.0-dev
sudo apt-get install cmake
You may compile/build your OpenCV on your TX1 device as this is what will be accomplished in this guide, alternatively you may cross-compile. To acquire the current build of OpenCV, you will need to git clone the repository with the following command.
git clone https://github.com/opencv/opencv.git
When the Git repository is complete, proceed into the OpenCV directory and type the following command:
This will generate a corresponding make file with all the provided libraries available on your system, please ensure the following is enabled in the final output log:
-- QT: NO
-- GTK+ 2.x: YES (ver 2.24.30)
-- GThread : YES (ver 2.48.1)
-- GtkGlExt: NO
-- OpenGL support: NO
-- VTK support: NO
-- Video I/O:
-- base: YES (ver 1.8.3)
-- video: YES (ver 1.8.3)
-- app: YES (ver 1.8.3)
-- riff: YES (ver 1.8.3)
-- pbutils: YES (ver 1.8.3)
When complete you may build and install OpenCV on your TX1 device with the following:
make install -J4
To have the camera input directly into OpenCV when standard capture methods will not function or fail, you will be required to use gstreamer as the capture method to provide a suitable video input for OpenCV.
The following pre segment is required to have the IMX274 camera as an input source for OpenCV. If you are using a different camera, this pre can be used as a template.
VideoCapture cap("nvcamerasrc ! video/x-raw(memory:NVMM), width=1920, height=1080, format=I420, framerate=30/1 ! nvvidconv flip-method=0 ! video/x-raw, format=I420 ! videoconvert ! video/x-raw, format=BGR ! appsink");
Originally from kdb355: IMX274 setup with OpenCV on Connect Tech Jetson™ Carriers